Dongfeng 6.3 Ton Crane Truck

Name: Dongfeng 6.3 Ton Crane Truck
Availability: InStock

Dongfeng 6.3 ton truck mounted crane combines cargo lifting and transport for efficient material handling and equipment delivery

Highlights:
✅ Crane: Maximum rated lifting capacity of 6.3 tons.
✅ Versatile Use: Construction materials, machinery and general cargo.
✅ Convenient Handling: Onboard crane helps reduce manual loading and unloading.
✅ Factory Customization: Vehicle configurations tailored to your working needs.

Consulta ahora

The DONGFENG 6.3 ton truck-mounted crane combines a four-section telescopic boom with a 6 m cargo body for material deliveries and on-site lifting. Designed for construction contractors, equipment distributors and installation teams, this crane truck transports loads and handles unloading at the worksite. The fully hydraulic crane provides full slewing and ground-level controls, with approximately 12.1 m fully extended boom length and 14.1 m lifting height. For buyers selecting a truck-mounted crane for building supplies, machinery positioning or yard handling, the DONGFENG configuration includes a synchronised FAST eight-speed transmission and a reinforced rear axle.

Truck Mounted Crane

6.3 t

MAX. RATED LIFT

BOOM SECTIONS

12.1 m

APPROX. BOOM LENGTH

14.1 m

APPROX. LIFT HEIGHT

DONGFENG FOUR SECTION CRANE TRUCK

Highlights

Fully hydraulic lifting, lower operating controls and a 6 m engineering cargo body.

Four Section Telescopic Boom

Approximately 12.1 m fully extended boom length for load positioning.

Fully Hydraulic Crane

Full slewing with lower operating controls beside the vehicle.

6 m Engineering Cargo Body

3 mm side panels and 5 mm floor for material transport.

Outrigger Support

Approximately 4.8 m outrigger span for crane setup.

COMPLETE VEHICLE VIEW

DONGFENG Crane Truck from Four Angles

View the wide cab, crane installation, cargo body and chassis layout in the complete vehicle photographs.

Truck Mounted Crane

APPLICATIONS

Applications and Intended Buyers

Construction Contractors

Deliver building materials and lift them into position at the worksite.

Equipment Distributors

Support machinery deliveries and on-site unloading.

Installation Teams

Position equipment within the crane load and reach limits.

Factory and Yard Operations

Move materials between storage and loading areas.

ESSENTIAL VEHICLE SPECIFICATIONS

Key Vehicle Specifications

ITEM	SPECIFICATION
Vehicle	DONGFENG 6.3 ton truck-mounted crane
Maximum Rated Crane Capacity	6,300 kg; actual capacity depends on working radius
Cargo Body Dimensions	6,000 x 2,450 x 550 mm (L x W x side height)
Overall Vehicle Dimensions	Length to be confirmed; width 2,550 mm; height 3,300 mm
Complete Vehicle Kerb Weight	7,900 kg; this is not payload
Bare Chassis Weight	2,950 kg
Cab	2150 wide-body cab
Tyres	8.25R16LT steel-cord tyres; 6PR as specified

POWERTRAIN AND CHASSIS

Engine Transmission and Chassis

ITEM	CONFIGURATION
Engine	Yunnei YN25PLUS160B diesel engine
Engine Output	114 kW
Displacement	2.499 L
Transmission	FAST eight-speed transmission with synchronisers
Wheelbase	5,000 mm
Rear Axle	Reinforced 8-ton rear axle
Frame	1900 frame specification with local triple-layer reinforcement
Leaf Springs	8 / 10 + 7

Cab and equipment: 2150 wide-body cab, ABS, central door locking, power windows and air conditioning. Cargo body construction: 3 mm side panels and 5 mm floor. The 8-ton rear axle specification describes the axle rating and does not state the vehicle payload.

CRANE CONFIGURATION

Four Section Hydraulic Crane Configuration

ITEM	CONFIGURATION
Boom	Four-section telescopic boom
Fully Extended Boom Length	Approximately 12.1 m
Lifting Height	Approximately 14.1 m
Outrigger Span	Approximately 4.8 m
Hydraulics and Controls	Fully hydraulic; full slewing; lower, ground-level controls

CRANE WORKING RANGE

Crane Load Chart and Assembly Dimensions

6.3 Ton Crane Truck

Supplied SQS157-4 load-chart reference: 6,300 kg at 2.5 m working radius; 3,000 kg at 4.2 m; 1,250 kg at 6.8 m; 1,000 kg at 9.5 m; 600 kg at 12.1 m. The 6.3-ton rating is the maximum rated lifting capacity, not the capacity at full reach. The dimension drawing refers to the crane assembly, not the complete truck. Follow the load chart and operating instructions supplied with the delivered crane.

KEY COMPONENTS

Crane Components and Control Options

The photographs show crane hardware and control examples. This vehicle uses lower, ground-level crane controls. Remote control, an upper operator station and an auxiliary hook are not specified and require separate configuration confirmation.

Dongfeng Crane Truck

Lifting Hardware

Main hook and wire rope shown for component identification.

Crane Support

Crane base and hydraulic outriggers shown as reference components.

Lower Controls

Ground-level crane operation is specified for this vehicle.

Reference Accessories

Remote control, upper operation and auxiliary hook require separate confirmation.

EXPORT SUPPORT

Configuration Production and Export Delivery

SERVICE	DETAIL
Configuration Confirmation	Confirm overall length, engine rating, tyre specification, crane chart and required accessories.
Production	Assemble the chassis, crane and engineering cargo body to the agreed specification.
Inspection	Check crane functions, outrigger operation, ABS and agreed chassis equipment before delivery.
Shipping	Prepare export documents and shipment arrangements for the agreed destination port.